First Alert’s innovative OneLink system allows multiple smoke and carbon monoxide alarms to be interconnected wirelessly. This combination SC07B smoke and CO alarm offers First Alert’s exclusive new Voice Warning System with Location Alert, which allows you to set multiple alarms with a location. When an alarm is sounded the interconnected system will alert you which room has a potential hazard that is setting off the alarm. If smoke is detected in the basement all of the wireless alarms will say “Warning, Evacuate, Smoke in Basement.” Alarms that communicate with each other may provide earlier warning of a potential danger as compared to single stand alone alarms. With the ease of wireless connectivity you can have a network of alarms setup in minutes.
Features:
• Exclusive voice alarm with up to eleven programmable locations
• Reliable in case of an emergency
• 10 to 95 percent relative humidity (RH)
• Electronically simulate smoke and carbon monoxide conditions, causing the unit to alarm and temporarily quiets the alarm
• Alarm Reset: Automatic when smoke and or carbon monoxide clears
• Advanced photoelectric smoke/co combination alarm
• Photoelectric Smoke and Electrochemical CO Sensors
• Single button test/silence
• Two silence features • can silence the low
-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm
• Remote Control Silence/Test uses most remote controls to temporarily quiet unwanted alarms and test alarm functions
• Optipath 360 Technology: Patented technology provides 360 degrees of direct access to the smoke sensor
• Perfect Mount: Allows for easy alignment of alarm
• Spread Spectrum Horn Tone: Lower and varying frequency makes it easier for the elderly with normal aged related hearing loss to hear the horn
• Latching Features: Alarm Latch • remembers which unit initiated an alarm; Low Battery Latch: Visually identifies unit in low battery condition
Technical Specifications:
• Model: SC07B
• Color: White
• Amperage: .05 amps
• Weight: 9.3 oz.
• 40 F (4 C) to 100 F (38 C)
• Smoke sensor: Photoelectric
• CO sensor: Electrochemical
• Dimensions: 1.45″ W x 1.15″ H x 0.8″ L




![Smoke Alarm Pro [Admin] contact us](http://www.contactmebutton.com/img/contactusbutton.png)




