Replaces model i12020

Kidde interconnected Ionization smoke alarms warn against a potential fire in your home by linking other Kidde compatible alarms to further increase the ability to hear the alarm anywhere. This alarm is a 120V AC powered ionization smoke alarm with 9V battery back-up, Hush feature, and replaces model i12020.

Features:

• Hush feature temporarily silences nuisance alarms
• One touch test button tests unit’s electronic circuitry
• Battery backup 9V battery included
• Tamper resist locking pin helps deter alarm tampering and theft
• UL Approved

Technical Specifications:

• Part Number: 21006378
• Type: Ionization
• Power: AC
• Voltage: 120VAC
• Battery Backup: Yes
• Battery Type: 9 Volt
• Alarms: Horn
• Siren/Horn (dB): 85
• Exit Light: No
• Hush Button: Yes
• Digital Readout: No
• Test Buttons: Yes
• Digital Readout: No
• Test Buttons: Yes
• Dia. (In.): 5.6
• Height: 1.55
• Operating Temp. (F): 40 to 100
• Warranty Length: 5 Years
• Provides: Early Warning of Smoke and Fire Hazards Even During Power Outages
• For Use With Interconnectable
• Locking Pin: Yes
• Standards: UL Listed
• Weight: 0.80

Quick Connect Installs quickly with snap-on electrical harness

The Kidde KN-COP-IC is an AC wire-in carbon monoxide alarm that protects you and your family from the dangers of carbon monoxide. The digital display allows for continuing monitoring of carbon monoxide levels. Its multiple contractor friendly features ensure easy installation and minimal troubleshooting. This alarm interconnects with up to 24 Kidde devices including smoke alarms, CO alarms and heat alarms on one wiring network. The KN-COP-IC includes a 9V battery back up for continuous protection in case of power failure along with a 5 year limited warranty.

The Kidde KN-COP-IC is an essential device designed to protect you and your family from the dangers of carbon monoxide in your home. The digital display feature allows constant monitoring of carbon monoxide levels and updates every 15 seconds to let you know if levels change. The peak level memory feature displays the highest CO level measured since the last reset. The 9V battery back up provides continuous monitoring of carbon monoxide levels even during a power failure. The KN-COP-IC includes a smart interconnect system. This system enables the unit to alarm in a carbon monoxide pattern and sound a different pattern when interconnected to a Kidde smoke alarm that is in alarm mode.

Features:
• Battery Pull Tab Eliminates battery installation time and keeps battery fresh
• Adjustable Mounting Bracket Allows for fast installation and perfect alignment
• Quick Connect Installs quickly with snap-on electrical harness
• Sealed Cover Reduces nuisance alarms: Sealed to protect sensor from contaminants prior to installation
• Tamper Resist Locking Feature to deter battery and alarm theft
• Alkaline Battery Backup for continuous protection in case of power failure

Technical Specifications:
• Part Number: 900-0121
• Power Source: 120VAC, 60HZ, 9V battery back-up
• Sensor: Electrochemical
• Audio Alarm: 85dB at 10ft
• Temperature Range: 40°F (4°C) to 100°F (38°C)
• Humidity Range: 5%-95% relative humidity (RH)

Advanced photoelectric sensor is especially effective in detecting smoldering fires

The Kidde PE120 is a 120VAC powered photoelectric smoke alarm with 9V battery back up. This advanced smoke alarm has the ability to function as a stand-alone unit or in an interconnected system. The Kidde PE120 includes a test button, quick-connect power harness and offers a 5-year limited warranty. The Kidde PE120 120VAC, photoelectric smoke alarm provides the best protection against slow smoldering fires and other types of fires providing an early warning signal to you and your family in the event of a smoke or fire incident. The PE120 includes a 9V battery back up, providing continuous protection even during a power failure. This alarm includes a quick connect power harness making installation simple and easy.

Features:
• Photoelectric Sensor: Advanced photoelectric sensor is especially effective in detecting smoldering fires
• Battery Backup (9V Battery Included) Provides continuous protection even during power outages
• Test Button: Tests units electronic circuitry, horn and battery function
• Quick Connect Power Harness: Makes installation fast and easy
• Dust Cover: Protects sensor during construction
• Battery Pull Tab: Eliminates battery installation time and keeps battery fresh
• Red LED: Indicates that the smoke alarm is operating properly and alarm condition
• Green LED: Indicates the presence of AC power.

Technical Specifications:

Part Number: 440399
• Power Source: 120VAC
• Sensor: Photoelectric
• Audio Alarm: 85dB at 10ft
• Temperature Range: 40°F (4.4°C) to 100°F (37.8°C)
• Humidity Range: 5%-95% relative humidity (RH)
• Dimensions: 5.6″ in diameter x 1.55″ depth
• Interconnects: Up to 24 Kidde devices
• LED: Green, receiving ac power
• Red, alarm mode

Replaces Kidde Model: 1235

The Kidde i12020 is an AC powered, ionization smoke alarm that operates on a 120V power source. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner that photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.

The i12020 includes a quick connect wiring harness for easy installation. The i12020 is a UL Listed product with a 5-year limited warranty.

Features:
• Ionization Sensing Technology
• One button design (operates Smart Hush and test)
• Large mounting base
• Tamper resist feature
• Alarm memory
• Pre-stripped wiring harness with tinned strands

Technical Specifications
• Replaces Kidde Model: 1235
• Electrical Wiring: 120 VAC
• Audio Alarm: 85dB
• Temp. Range: 40 • 100 Degrees Fahrenheit
• Humidity Range: up to 85 Percent Relative Humidity
• Sensor: Ionization
• Wiring: Quick Connect Plug with 8″ Pigtails

Battery Operated (9V battery included) Provides continuous protection even during power failures

The Kidde 0915E is a full size, ionization, battery operated smoke alarm designed to protect you and your family from the dangers of smoke and fire. The 0915E is powered by a 9V battery, providing continuous protection even during power outages. This unit includes a flashing red LED to indicate the alarm is receiving power.

The Kidde 0915E basic, battery operated smoke alarm provides you and your family an early warning signal against the dangers of fire and smoke. This easy to install smoke alarm includes a test button to verify the units electronic circuitry, horn and battery function are work properly. The 0915E also includes a tamper resist feature to help deter theft or tampering. This smoke alarm is powered by a 9V battery and is suitable for all living areas. UL listed.

Features:
• Easy Installation with no wiring required
• Battery Operated (9V battery included) Provides continuous protection even during power failures
• Quality Design• 5 year limited warranty
• Flashing LED Indicates alarm is receiving power
• Test Button Verifies battery and alarm operation.
• Low Battery Indicator Chirps when battery needs replacement

Technical Specifications:
• Dimensions: 5″ Diam. x 1-1/2″ Width
• Power Source: 9V Battery (included)
• Audio Alarm: 85dB at 10ft
• Temperature Range: 40°F to 100°F (4°C to 38°C)
• Humidity Range: 5%-95% relative humidity (RH)
• Sensor: Ionization
• Size: 5″ in diameter x 1.75″ depth
• Interconnects: No
• LED: Red, normal operation

Includes 9V battery back up that provides protection during a power outage where AC-only units cannot

The Kidde KN-COEG-3 AC powered, plug-in CO and Explosive Gas Alarm protects you and your family from two deadly threats. The KN-COEG-3 includes 9V battery back up that provides protection during a power outage where AC-only units cannot. By pressing the Peak Level Button you can see the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous digital display shows you the level of carbon monoxide (if any) in addition to whether or not gas is present. The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane.

The Kidde KN-COEG-3 provides you and your family a high level of protection. The alarm is easily installed in any AC wall outlets, giving you the choice of a direct-plug, 6 power cord, or table top unit.

Features:
• Sounder Alarm: The KN-COEG-3 offers a loud 85-decibel pulsing alarm that will sound to alert you to a potential problem
• Alarm Condition: Carbon Monoxide 4 quick beeps, followed by 5 seconds of silence, followed by 4 quick beeps. Repeat with a number showing in the display (CO concentration in ppm)
• Gas: one second of alarm on, one second of alarm off, repeating with GAS” shown in display

Technical Specifications:
• Part Number: 900-0113
• Power Source: 120VAC
• Sensor: Electrochemical
• Audio Alarm: 85dB at 10ft
• Temperature Range: 40°F (4.4°C) to 100°F (37.8°C)
• Humidity Range: 5%-95% relative humidity (RH)
• Dimensions: 6.1″L x 3.8″W x 1.8″H
• Interconnects: No
• Wiring: Plug-In
• LED: Displays CO concentration in PPM
• Certifications: UL Listed

The Kidde SL177i is a 120VAC wire in unit that provides a visual warning when part of an interconnected system

The Kidde SL177i is a 120VAC wire in unit that provides a visual warning when part of an interconnected system. This unit can be directly interconnected with Kidde smoke alarms, heat detectors and carbon monoxide alarms. When triggered by a smoke alarm or heat detector, it will produce a steady flash warning. When triggered by a carbon monoxide alarm it will produce an intermittent flash warning. The SL177i has a 5 year limited warranty and is UL Listed.

The Kidde SL177i, used in conjunction with a smoke, heat or carbon monoxide alarm, provides a bright visual signal to warn of a smoke, heat or CO hazard. The Kidde Strobe light benefits the hearing impaired, allowing a visual alert of a danger. This unit also includes a tamper resist pin that helps to deter thief and tampering.

Technical Specifications:
• Part Number: 900-0124
• Power Source: 120VAC, 60HZ
• Temperature Range: 40°F to 100°F (4°C to 38°C)
• Dimensions: 5.6″ in diameter x 3″ depth
• Interconnects: Up to 24 Kidde devices

Low profile flush mount design

Install with confidence. The Kidde Silhouette innovative low profile alarm fits in most common electrical two-gang and plastic, round boxes with 3 1/2 inch hole spacing. Pre-stripped wiring harness includes easy-off cap and does not require a stripping tool. The single button operates both Smart Hush and alarm test for easy operation and less confusion. While the sealed backup battery provides protection in case of power failure and does not need to be replaced for the life of the alarm.

This alarm is not designed to be interconnected with other manufacturer’s products, unless otherwise specified.

Features:
• Easy Installation
• User-friendly
• Low profile flush mount design
• Smart Hush button/test button
• Sealed rechargeable battery backup
• Multiple Installation Options

Technical Specifications:
• Color: White
• Voltage: 120V
• Rating: 60Hz, 30mA max
• Audio Alarm: 85dB
• Temp Range: 40 to 100 degrees Fahrenheit
• Humidity Range: up to 85% relative humidity (RH)
• Sensor: Ionization
• Wiring: Quick connect 6 inch wire harness with 3 inch lead from alarm
• UL, FHA, HUD, NFPA listed

The new Kidde 0910 is a 10-year, sealed battery, ionization, smoke alarm with Alarm Memory and Smart Hush feature.

The new Kidde 0910 (900-0136-003) is a 10-year, sealed battery, ionization, smoke alarm with Alarm Memory and Smart Hush feature. The innovative design of this alarms automatic activation is unlike any other smoke alarm. The 0910 alarm will automatically activate when it is attached to the mounting bracket; there are no pull-tabs, no switches, everything is automatic. At the end of the alarm life, the unit will chirp, indicating the alarm is in need of replacement. The sealed-in board-mounted batteries will power the 0910 unit for its complete 10-year life. No replacement batteries will ever be needed. The 0910 also features Smart Hush Control allowing you to temporarily silence nuisance alarms quickly and easily.

Features:
- Pre-installed Lithium Battery Provides Power for 10 Years
- Self Activation Alarm Automatically Activates when Attached to the Mounting Bracket
- Alarm Memory Alerts you with an LED if the Alarm has Sounded since the Test Button was Used
- Smart Hush will Temporarily Silence Nuisance Alarms
- Test/Reset Button Tests Circuit Operation and Resets Memory After an Alarm Condition Occurs
- End of Life Warning Indicates the Alarm is in Need of Replacement
- Tamper Resist Preventing Someone from Removing the Unit from the Mounting Bracket
- LED A Flashing Red Indicator Light with Four Modes of Operation: Standby, Alarm Mode, Hush Mode, and Memory Set

Technical Specifications:
- Unit Number: 0910
- Power Source: Three, 3V Lithium batteries
- Sensor: Ionization
- Audio Alarm: 85dB at 10ft
- Temperature Range: 40°F (4.4°C) to 100°F (37.8°C)
- Humidity Range: 5%-95% relative humidity (RH)
- Interconnects: No
- LED: Four modes of operation
- Warranty: 10 year limited

Warranty: 5 year limited warranty

The Kidde Silhouette innovative low profile alarm fits in most common electrical two-gang and plastic, round boxes with 3 1/2 inch hole spacing

Install with confidence. The Kidde Silhouette innovative low profile alarm fits in most common electrical two-gang and plastic, round boxes with 3 1/2 inch hole spacing. Pre-stripped wiring harness includes easy-off cap and does not require a stripping tool. The single button operates both Smart Hush and alarm test for easy operation and less confusion. While the sealed backup battery provides protection in case of power failure and does not need to be replaced for the life of the alarm.

This alarm is not designed to be interconnected with other manufacturer’s products, unless otherwise specified.

Features:
- Easy Installation
- User-friendly
- Low profile flush mount design
- Smart Hush button/test button
- Sealed rechargeable battery backup
- Multiple Installation Options

Technical Specifications:
- Color: White
- Voltage: 120V
- Rating: 60Hz, 30mA max
- Audio Alarm: 85dB
- Temp Range: 40 to 100 degrees Fahrenheit
- Humidity Range: up to 85% relative humidity (RH)
- Sensor: Ionization
- Wiring: Quick connect 6 inch wire harness with 3 inch lead from alarm
- UL, FHA, HUD, NFPA listed