Basic battery operated carbon monoxide alarm meets most state and local codes for carbon monoxide alarms

The BRK Model CO250B is a basic 9V battery operated carbon monoxide suitable for multifamily dwellings, hotels, motels, and hospitals defined in standard NFPA 101. The UL 2034 listed alarm provides the earliest warnings whenever carbon monoxide is present. It features an electrochemical carbon monoxide sensor, an 85dB horn, a supervised 9V battery power supply, a full function test switch, a silence feature to silence unwanted nuisance alarms, a red LED light that indicates DC power or alarm. It also features a tamper resistant locking pin that locks alarm cover to prevent removal of battery. To insure the battery is always replaced properly, the cover is designed to resist closing when the battery is missing. Designed for wall or ceiling mounting. Includes mounting anchors and screws.

Additional Information:
Manufacturer Specification Sheet (PDF File)
Manufacturer User Manual (PDF File)

Features:
• Electrochemical CO Sensor – The most accurate type of sensor available
• Silence Feature
• End of Life Signal provides audible notification alarms needs to be replaced
• Tamper Resistant
• Locking Pin
• 9V Battery Included
• 5-Years Limited Warranty

Technical Specifications:
• Model #:CO250B
• Sensor: Electrochemical
• Warranty Claim: 5-Years
• Package Type: Box
• Color: White
• Battery backup: N/A

This product is intended for use in ordinary indoor locations of family living units. It is not designed to measure compliance with OSHA commercial or industrial standards. This alarm is not designed to be interconnected with other manufacturer’s products.

Features:
• Low profile flush mount design
• Blue digital display: Provides CO level
• Peak level Button/Test Button: Displays highest CO level measured since last reset
• 3 LED indicators
• Rechargeable battery backup: Sealed battery does not need to be replaced for life of alarm
• User friendly
• Interconnectable with up to 24 devices (see users guide for listing of interconnect units)
• Pre-stripped wiring harness includes easy-off cap, does not require stripping tool

Technical Specifications:
• Electrical Rating: 120 VAC, 60Hz; 30mA max per alarm
• Audio Alarm: 85dB
• Temperature Range: 40 degrees F (4.4 degrees C), 100 degrees F (37.8 degrees C)
• Humidity Range: 10 to 95 percent RH non-condensing
• CO Sensor: Electrochemical
• Wiring: Quick connect plug with 8 inch pigtails
• Meets Response Time: At 70 ppm, unit must alarm within 60-240 min., At 150 ppm, unit must alarm within 10-50 min., At 400 ppm, unit must alarm within 4-15 min.
• UL Listed

Compatible with other contractor preferred Firex products

The Kidde Firex i4618 Smoke Alarm is an ionization 120V AC smoke alarm with battery back-up for single or multiple station use. It includes a False Alarm Control feature which allows the user to quiet an unwanted alarm for up to 15 minutes. The i4618 has a front loading battery door, 85 decibel horn, test switch and dual purpose LED indicator; constant green power on LED confirms AC power is present and the flashing red displays alarm/battery status. The unique PowerLink Tab is designed to allow the smoke alarm to be shipped with the battery already installed. It keeps the door from closing until installation, which prevents the battery from draining prematurely. The installer simply removes the PowerLink Tab, closes the door and tests the unit. This results in a faster installation time.

The latching LED feature clearly identifies the smoke alarm that initiated an alarm in an interconnected system with a constantly illuminated red LED. The LED will remain lit until the test button is depressed on that unit.

This smoke alarm mounts to any single or 4 octagon junction box or square-to-round drywall ring and has 8 long pigtails with a Quick Connect harness for permanent connection. The i4618 is interconnectable with up to 11 other compatible Firex smoke alarms and as many as 6 Firex heat alarms for a total of not more than 18 interconnected devices. This Firex unit should be placed in single-family households or in each individual living unit of multiple-family buildings.

Features:
• Latching LED: A red LED flashes until reset for quick, clear identification of the initiating smoke alarm in an interconnected system
• Visible Low Battery Indicator: Helps locate chirping unit
• Front loading battery door: Makes battery changing simple
• PowerLink Tab: Makes installation faster and easier
• False Alarm Control: Quiets unwanted alarms for up to 15 minutes
• Interconnects with other Firex smoke alarms and heat alarms
• Compatible with other contractor preferred Firex products
• Factory sealed housing: Prevents tampering and provides outstanding durability
• Attractive low profile design: Our contemporary StyleLine design is a favorite among consumers

Technical Specifications:
• Model 21007581
• Operating Temperature: 40°C to 100°F
• Interconnect Quantity: Up to 18 Firex devices max:
• Firex smoke alarm items 5000 (model FADC), 4418 (model AD), 4518 (model ADC), 4480 (model PAD), Firex heat alarm item 5700 (model ADH) (up to 6 heat alarms max.)
• Electrical Rating: 120V AC, 60Hz, 50mA max, 9 volt Battery Back-up
• Alarm Point obs. 1.35 +/- 0.7%ft.
• Horn Output: 85 decibels at 10 feet
• Listing: U.L. 217
• Detection Type: Dual ionization chamber
• Humidity Range: 10% – 93% relative humidity

3 Story, 25 Feet one time use worry-free Escape Ladder

Someone in the U.S. dies in a home fire every three hours, according to the National Fire Protection Association, which recommends one ladder in every occupied room on floors above the main level. The Kidde Escape Ladder provides a means of escape from a fire if you live in a two or three story home. It stores easily under the bed or near a window, and is quick and easy to use.

Ladder is for 1 time use ONLY. Disregard after single use.

Features:
• 3 Story, 25 Feet one time use worry-free Escape Ladder
• Strong and Durable Construction
• Easy to Use: Attaches Quickly to Most Common Windows
• Tangle-Free Design: Fast and Easy to Deploy
• Ready for Use: No Tools or Assembly Required
• Fits Most Standard Size Windows
• Ladder Tested to 1000 lbs.
• Anti-Slip Rungs
• Compact for easy Storage
• 5 year Limited Warranty

Technical Specifications:
• Part Number: 468094

"OneLink Wireless Alarms provide a cost effective solution when it comes to renovation and retrofit project"

The First Alert (SA511B) eases the time, labor, and investment to retrofit hardwired alarms. Now with its patented OneLink technology, Wireless interconnect technology eliminates the need to pull wires through existing walls, saving you an average of between $150 – $200** per alarm when compared to retrofitting hardwired smoke alarms in existing walls or ceilings. First Alert, together with BRK brand alarms, continue to reinvest in the research and development of Smoke Alarm Safety Products.

**Note: Based on average retrofitting costs of time, material and labor to connect to existing alarm circuit, drywall repairs, painting, etc. Special cases that require conduit, wire mold, concrete drilling, etc. would add additional costs and increase savings.

Features:
- OneLink enabled alarm
- Exclusive voice alarm with programmable location; programmable with up to eleven locations
- Single button test/silence
- Two silence features: can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm
- RF Interconnect: reliable and secure radio frequency communication between alarms. 915 MHz frequency with 65,000 security codes and 3 channel frequency hopping
- Optipath 360 Technology: patented technology provides 360 degrees of direct access to the smoke sensor
- Perfect Mount: allows for easy alignment of alarm
- Spread Spectrum Horn Tone: lower and varying frequency makes it easier for the elderly with normal aged related hearing loss to hear the horn
- Latching Features: alarm latch – remembers which unit initiated an alarm
- Low Battery Latch: visually identifies unit in low battery condition
- 10-Years Limited Warranty Through the Manufacturer

Technical Specifications:
- Alarm Dimensions: 5″ Dia. X 2″ High
- Temp Range: 40° F (4° C) to 100° F (38° C)
- Audio Alarm: 85 decibel alarm
- Operating Voltage: Two 1.5V AA Batteries
- Humidity Range: 10% – 90% relative humidity (RH)
- Smoke Sensor: Photoelectric
- Operating Frequency: 915 MHz. FCC approved. Complies with Part 15 of the FCC Rules
- RF Linking: Automatic with 65,000 security codes
- Alarm Reset: Automatic when smoke clears
- Test/Silence Feature: Electronically simulates smoke condition
- Interconnections: Up to 18 units, RF or hardwired, with smoke, carbon monoxide, heat alarms and relays. Maximum 12 smoke alarms

Warranty: 10-Year Warranty Through the Manufacturer

OneLink Wireless Technology eliminates the need to pull wires through existing walls, saving time and money
Meets UL 217 standard: Single station smoke alarms
Listed with California State Fire Marshal
UL mandated repeating alarm horn pattern (85 dB)-3 beeps, pause, 3 beeps

Additional Information:
Manufacturer Specification Sheet (PDF File)
Manufacturer User Manual (PDF File)
Manufacturer Dimensions and Scale Drawings (JPEG File)